Hydro Jetting Clears Out Years Of Grease And Mineral Buildup
Sometimes your drains require a more thorough cleaning than snaking them provides. When this happens, Mid America Drain uses hydro jetting to completely clear the buildup of scale, grease, and other debris that causes drainage problems. This process is also called hydro flushing.
If you experience repeated clogs or slow drains, even after frequent snaking to clear them, you need a more complete cleaning of your drain system.
Mid America Drain will perform a push camera video inspection of your drains to identify the source and location of the problem. Then our technicians use hydro jetting to completely clean out the source of the problem.
Your pipes will be the cleanest they have been since they were first installed.
Watch our video for a demonstration
Many of our clients utilize Mid America Drain, on a monthly or bi-monthly basis, for our facility maintenance programs.
How Hydro Jetting Works
You plumbing system has an access point called a cleanout. This opening gives access to your drain system for easier removal of debris and clogs.
Our technicians first do a push camera video inspection of your pipes to identify the problem and its location.
Using the cleanout access point, our technician inserts the hydro jet nozzle into your pipes up to the point of blockage. Pressurized water sprays out of the nozzle into the blockage, breaking it up and allowing it to flow safely back down the cleared section of pipe.
Watch our video on hydro jetting to see how it works.
Include Hydro Jetting In Your Routine Maintenance Program
As part of your usual drain system maintenance program, hydro jetting will minimize the chances of future blockages and slow drains by keeping them clean of scale and debris. And hydro jetting is environmentally friendly because it uses only water clean your pipes.